Lava Stone Necklace

By Spotlight

Featured in our VIP Catalogue 'Find & Create'

Final Result

Materials

You will need the following from the
Ribtex Inspirations range:
1 x DBX050B Lava Stone Large Heart Black 1pc
1 x DBX050B Lava Stone Large Oval White 3pcs
1 x DBX050B Lava Stone 14mm Round White 8pcs
1 x DBX050B Lava Stone 14mm Round Black 8pcs
1 x JF159 Ribtex Tiger Tail Silver 5m
1 x JF287 Ribtex 2mm Round Crimpers Dark Silver 100pcs
1 x JF187 Ribtex 4mm Collot Crimps Silver 20pcs
1 x JF849 Ribtex Connector Toggle Plain 13mm 6pcs
1 x JF383 Ribtex Turks Head Spacer Silver 26pcs
1 x JF468 Ribtex 4mm Jump Ring Dark Silver 40pcs
1 x CHM434 Ribtex Charm Bracelet Spacer 5.6mm Silver 1pc
1 x WB023 Ribtex 5mm Wood Seed Bead Black 200pcs

Additional Requirements:
JF165 Ribtex Round Nose Pliers
JF166 Ribtex Cutter Pliers

Step 1

Cut a length of tiger tail approx. 80cm long.

Step 2

Thread onto the tiger tail 14 wooden beads.
Thread the tiger tail through the hole in the heart.
Make sure both sides of the tiger tail are even in length
and thread one 2mm crimp over both ends of the tiger tail.
Use the cutter pliers to close crimp into place.

Step 3

Thread 1 x 14mm black lava bead and the charm bracelet spacer o
to both lengths of tiger tail.

Step 4

Thread onto one side of the tiger tail the following combination:
3 x wooden beads, 1 x spacer, 1 x 14mm white lava bead, 1 x spacer,
3 x wooden beads, 1 x spacer, 1 x 14mm black lava bead, 1x spacer,
4 x wooden beads, 1 x spacer, 1 x white oval lava bead, 1 x spacer,
3 x wooden beads, 1 x spacer, 1 x 14mm black lava bead, 1 x spacer,
3 x wooden beads, 1 x spacer, 1 x 14mm white lava bead, 1 x spacer,
3 x wooden beads, 1 x spacer, 1 x 14mm black lava bead, 1 x spacer,
3 x wooden beads, 1 x spacer and 20 x wooden beads.

Step 5

Thread a 2mm crimp onto the tiger tail and using the cutter pliers to
close crimp into place.

Step 6

Thread onto the tiger tail 1x collot crimp and 1 x 2mm crimp. Using
pliers close 2mm crimp onto the tiger tail inside the collot crimp. Trim the excess tiger tail and close the collot crimp to create the loop on the end.

Step 7

Twist open a jump ring and thread through crimp loop and one side of the
connector toggle, close the jump ring to complete one side of the necklace.
8. To complete the other side of the necklace repeat the instructions from step 4.